Loading... Please wait...
New Site Coming Soon!
Check it out here: www.piercearrowinc.com/store

2 Function Air Actuator Kit (92150-8)

Hover over image to zoom

  • Image 1
  • Image 2
Lodar
$599.00
SKU:
92150-8
Weight:
4.00 LBS

 Product Description

Operate your hand lever controls with Lodar's actuator series. An air compressor with at least 110-120 psi is required for proper operation. This Lodar 2 function system features FETS, wide band, standard output, standard transmitter and an integrated actuator system. Five year pro-rated warranty. 

INCLUDES

1 x Standard Transmitter

1 x Air Actuator

1 x Actuator Receiver with Wiring Harness and Glands

1 x Lo-Cover

1 x Lanyard

1 x Instructions 

ACTUATOR SPECIFICATIONS 

FEATURES

 

Soft-Start | a flow control valve in the supply line allows adjustment of the air supply into cylinder, hence the speed at which it moves. This gives a degree of "feel" to the system when "inching" equipment, without restricting the exhaust flow from the cylinder but also allowing immediate shut off.

   

Manual over-ride | this is available at all times. At rest, both pipes to the cylinder are "open to atmosphere", allowing for free movement of the piston, with return to center when the system is deactivated.

 

ASSEMBLY

 

Air Cylinder(s) 32mm(1.25") bore x 50mm(2") stroke Fitted with trunnion and clevis, with lug(s) ready for welding 2 push fit elbows per cylinder
 

 

CONTROL BOX         

 

Radio Receiver with outputs to valves - prewired
Flow control valve
3ft lengths of output pipe with push fit connections to the cylinder(s) - color coded for each pair of functions.
6ft length blue supply pipe fitted with 1/4" adaptor (push fit)
8ft twin core power supply cable
 

STANDARDS

 
Max air pressure 120psi
Air requirements Must be CLEAN and DRY (air flow is minimal)
Max push 149 lbs @120psi
Max pull 128 lbs @120psi
Voltage 12 and 24 Volts available (24 Volt systems are suffixed 24 – e.g. 92 1 50/24 etc)
   

 

TRANSMITTER SPECIFICATIONS 

SWITCH TYPE

   

 

Type     Tactile Dome
       

BATTERY

   

 

Type     9V Alkaline Manganese (GP 1604A – JIS 6LF22 – IEC 6LF22 – Eveready 522 – Duracell MN1604)
       

CURRENT DRAW

     
Quiescent     15 micro amps
Operating     20 milliamps
       

PROTECTION

     
IP Rating     55
Registration codes     Over 16 million
       

PERFORMANCE

     
Temp Range     -10o C to + 40o C (13o F to + 104o F)
Range Nominal     60 meters (200 ft) from the Receiver, when driving a momentary output without signal drop out
Transmitted power     1 mW Typical
       

COMPLIANCE                  

     
EMC     Exceeds ETSI 300 220. Compliant E11 10R-037601
Modulation     FM
Frequencies     418.00 MHz F1D  USA (optional UK)   
      433.92 MHz F1D World wide (optional USA)
       

 

RECEIVER SPECIFICATIONS 

SWITCH TYPE

   

 

Output Switching      MOS Field Effect Transistor (P Channel Power MOSFET) 
       

SUPPLY VOLTS

   

 

Nominal     12/24 Volts DC
Absolute Maximum     40 Volts DC
Minimum      8 Volts DC
Output Switch Supply     Internal 12/24 Volts
       

AMPS

   

 

FET Rating     15 Amps
System Rating     15 Amps
Quiescent Current     25 mA on Standby (Not SET)
Overload Protection     15 Amps (Auto Shutdown)
       

AERIAL

   

 

Internal Antenna     Yes Supplied and fitted
External Antenna     Optional See Accessories    Aerial Kit with 3 m Coax (9863)
       

OUTPUTS

   

 

Master      1   Can be Parallel or Continuous.
Function     2
       

PERFORMANCE

   

 

Simultaneous Outputs     Yes   With horizontal interlocks (Interlocks are programmable)
Instant TX response     Yes   No perceivable delay between TX operation and RX action
       

DIAGNOSTICS

   

 

LED’s     Yes   Confirm 5 Volts, SET, Fault and all Outputs.
       

PROTECTION

   

 

ESR Safety     Yes   See ESR Safety document
Back EMF     Yes   Diode protected on all outputs
Registration codes     Yes   Over 16 million
STOP Connection     Yes   Internal Emergency Stop Connection. 
       

WIRING

   

 

Wiring Loom     Yes   3 meters (10ft) supplied and fitted
Cable Gland     Yes   Supplied and fitted
Connections     Screw terminal into plug and socket on PCB, for easy “swap out”
       

ENCLOSURE

   

 

Weight     0.3 lbs (335gms)
Lid     Smoke PVC - to view LEDs
Base     Black PVC
Breather     Gortex fitted in base
Mounting     4 external lugs
Fixings     5mm (3/16”) not supplied
IP Rating     Performs to IP67 standard (0.5 meter water for 1 hour)

 Warranty Information

5 Year Pro-Rated Warranty

 Other Details

Functions (Outputs):
2 Functions
System Type:
Transmitter & Receiver Kit
Range / Frequency:
200 ft
Special Features:
Air Actuator
Valve Operation:
Hydraulic

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

newsletter

Copyright 2017 Pierce Sales. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the 2 Function Air Actuator Kit (92150-8) to your wish list.